STATGUARD FLOOR FINISH 1 GAL

• Static Dissipative Cross-Linked Floor Finish
  Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
• Dissipative (1 x 10⁶?to < 1 x 10¹⁰?ohms) Coating – ANSI/ESD S7.1 and ESD TR53
  Meets or exceeds ANSI/ESD S20.20 minimum requirements as an ESD protective floor or as a primary grounding method
• Low Tribocharging (<100 volts) Coating – ANSI/STM 97.2
  Meets or exceeds ANSI/ESD S20.20 minimum requirements for charge generation on flooring.
• 18% Solids- 3 Coat System
  Reduces labor needed for initial install and on-going maintenance of the floor
• UL Listed for Slip Resistance
  Tested by Underwriters Laboratory to their slip resistance standards to ensure employee safety and to mitigate user?s liability exposure
• Lead-free RoHS Compliant
• Trouble shoot common floor care problems.?Click HERE.
• Made in the United States of America?
  This item is made and stocked in?Canton, MA

Click Here?for Clean Room and Raised Floor application instructions

?

Important Safety Feature

Safe Walking Surface

Classified by UL as to slip resistance only, Statfree? and Statguard? provide superior electrical properties along with a safe walking surface. Underwriters Laboratory has evaluated Statfree? and Statguard? and tested them to their slip resistance standards. To ensure employee safety and to mitigate user’s liability exposure, it is important to use floor finish that has been successfully tested for slip resistance, and is properly applied and maintained.

?