- Thick, energy absorbing
Excellent cushioning mat for trays, carts and benches.
- Dissipative cushioned vinyl bottom layer
Provides energy absorption for components susceptible to physical shock like disk drives
- Soft, pliable, material
Can be easily die cut or razor cut
- RTT: 10E6 – 10E8 ohms per ANSI/ESD S4.1
Meets ANSI/ESD S20.20 and EIA-625 ESD worksurface and flooring requirement
- Compatible with Continuous Monitors
- Non-humidity dependence
Provides consistent electrical performance regardless of ambient humidity
- Dimensionally stable
Minimal shrinkage and curling
- Lead-free RoHS compliant
- Grounding Hardware not included
- Made in The United States of America
This item is stocked in Cartersville, GA
Rtt: 10E6 -10E8 Ohms per ANSI/ESD S4.1
Rtg: 10E6 -10E8 Ohms per ANSI/ESD S4.1
Thickness: 0.375″ (9.5mm)
Per ESD Association: “The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point.” ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10E9 ohms. “If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10E6 ohms.” “Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration.” (Ref: TR 20.20 section 5.3.1).
Due to variations in computer monitor displays, color shown may not be exact. For true accurate color, please email Service@desco.com to request an actual sample.