MAT, STATFREE HJ, RUBBER, DISSIPATIVE, BLUE, 0.078” x 24” x 48”

• Dissipative Dual Layer ESD Worksurface
  Provides a worksurface that does not generate a static charge and will control the discharge rate from all conductors (including ESD susceptible items) that are placed on the surface¹.
• NEW Abrasion Resistance Rubber Compound
  Increased hardness² (80 to 90 Type A) for greater resistance to abrasion, cuts, stretching and tearing. May be used in soldering applications with flux and other chemicals.
• Dissipative (1 x 10⁶ to <1 x 10⁹ ohms Rtt) Top Layer
  Meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items.
• Conductive (<1 x 10⁶ Rtt) Bottom Layer 
  Reduces the resistance to ground (Rtg) from the top of the surface to the groundable point ground and allows the material to be used with ESD workstation monitors.
• Laser Engraved With ESD Protective Symbol, Specs, and Manufacturer Information³
  Identifies ESD protective product for control & auditing purposes.
• Lead-free RoHS compliant
• Made in Japan

This item is stocked in Canton, MA

1. Worksurfaces mats must be properly grounded to remove ESD charges.
2. Due to the increase hardness of the Statfree HJ® material trimming or cutting the material may be difficult.
3. Additional lot coding information is marked on the bottom (black conductive) side of the material.