- Static Dissipative Cross-Linked Floor Finish
Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
- Dissipative (10E7 – 10E9 ohms) Coating – ANSI/ESD S7.1 and ESD TR53
Meets or exceeds ANSI/ESD S20.20 minimum requirements as an ESD protective floor or as a primary grounding method
- Low Tribocharging (<100 volts) Coating – ANSI/STM 97.2
Meets or exceeds ANSI/ESD S20.20 minimum requirements for charge generation on flooring.
- 18% Solids- 3 Coat System
Reduces labor needed for initial install and on-going maintenance of the floor
- UL Listed for Slip Resistance
Tested by Underwriters Laboratory to their slip resistance standards to ensure employee safety and to mitigate user�s liability exposure
- Bag-In-Box Packaging
- Lead-free RoHS Compliant
- Made in the United States of America
This item is made and stocked in Canton, MA
Click Here for Clean Room and Raised Floor application instructions
Important Safety Feature
- Safe Walking Surface
|Classified by UL as to slip resistance only, Statfree® and Statguard® provide superior electrical properties along with a safe walking surface. Underwriters Laboratory has evaluated Statfree® and Statguard® and tested them to their slip resistance standards. To ensure employee safety and to mitigate user’s liability exposure, it is important to use floor finish that has been successfully tested for slip resistance, and is properly applied and maintained.
|RTT: 10E7 ohms per ANSI/ESD S4.1 @ 50% R.H.
|Coverage: 2,000 sq. ft/gallon
|Density: 8.4 lbs./gal