- NEW Large OLED Display
Displays resistance mantissa and exponent, temperature, relative humidity and test voltage
- NEW Internal Memory
Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity and test voltage.
- NEW Measurement Stability Modes
Sets the 15-second electrification period for test requirements*
- NEW Electrode Spacers
Spaces the 5 lbs. electrodes to 10 and 36 inches for resistance point-to-point (Rtt) measurement requirements of ANSI/ESD S.1 and ANSI/ESD S4.1
- NEW Measurement Location Labels (Pack of 25)
Labels and tracks areas and materials measured for surface resistance
- Digital Compliance Verification Surface Resistance Meter Kit
Measures resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and others
- Resistance Range: 1.0 x 103 to 1.0 x 1012 Ohms
Determines if a surface is conductive, dissipative or insulative for ESD control applications in electronics manufacturing or handling environments
- Under Load Test Voltages (10V or 100V ±5%)
Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification
- 50005 Concentric Ring Probe Accessory
Measures surface resistance per ANSI/ESD STM11.11 and volume resistance per ANSI/ESD STM11.12 of planar material
- NEW 19295 Handheld Electrode Accessory
Meets resistance measurement requirements of TR53, ANSI/ESD STM97.1 and other documents
- NIST Calibrated with Certificate Included
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
- Made in the United States of America
This item is made and stocked in Chino, CA
Kit Includes:
1 Digital Surface Resistance Meter
2 Test Leads, 5′ Length
2 5 lbs. Electrodes
1 Electrode Spacer, 10″
1 Electrode Spacer, 36″
4 AA Alkaline Batteries
1 Ground Plug Adapter
1 Gator Clip
25 Measurement Location Labels
1 Plastic Carrying Case
1 Certificate of Calibration
*Measurement Stability Modes:
Auto Stabilization enables a 15-second electrification period when the measured resistance is 1 x 1010
ohms or greater to maintain test accuracy.
Fixed Stabilization complies with ANSI/ESD S4.1 and enables a 15-second electrification period when
the measured resistance is 1 x 106 ohms or greater.