- NEW Compatibility with ESD Glove Test Fixture
Pair with the EMIT 50755 ESD Glove Test Fixture to allow operators to perform tests while wearing gloves or finger cots
- Tests Operator’s Path-To-Ground; Wrist Strap limits 750 kilohms to 10 megohms, Footwear limits 750 kilohms to 35 megohms*
Determines that operator’s personal grounding device** is functioning correctly
- Simultaneous Testing in Up to 3 Seconds
Reduces time spent testing personal grounding devices used in ESD Control Plans
- Solid State Touch Test Button with No Moving Parts
Maintains accuracy of tests and extends the lifetime of the tester
- 30 Volt Test Signal
Provides accurate tests that are not humidity dependent
- Relay for Use with Automatic Doors Or Other Locking Systems
Controls access to ESD Protected Areas
- Calibration Unit Available for Accurate Performance And Conformity Testing In The Field
See Desco Item 50424
- NIST Calibrated
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
- Made in the United States of America
This item is made and stocked in Chino, CA
*Default test ranges listed. Additional test settings are noted in the tech bulletin TB-3034
**The Combo Tester X3 will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 107 ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.
