- Groundable Static Control Garment System Tested Per ANSI/ESD S20.20-2014 (Rtg < 3.5 X 107 ohms) Requirements, per ANSI/ESD STM2.1
Allows operators and smock to be bonded or electrically connected to ground to prevent ESD events in ESD Protected Areas.
- Minimum of 9% Carbon Conductive Nylon Fibers Woven In Chain-Link Design
Provides continuous and consistent charge dissipation throughout lifetime of smock.
- Creates Faraday Cage Effect Around Torso And Arms Of Operator
Shields ESD charges from operators’ clothing from damaging ESD sensitive devices.
- Panel To Panel Conductivity
Prevents isolated charged conductor in ESD Protected Area.
- Hip-To-Cuff Grounding
Grounds operator with no need for a cord to be attached to the operator’s wrist.
- Snaps on cuff of smock
Wristband snaps to inside cuff.
- 2-Year/100 Launderings Limited Warranty – Click HERE For Test Results
Extended lifetime of garment will maintain its electrical and ESD properties.
- Made in the United States of America
This item is made and stocked in Miami, FL.
Click Here For Smock Sizing Chart
What the ESD Association says about ESD Garments