CLEANER Brake Parts 14oz Gunk Non-Chlorinated


Product SKU: RCM715
Minimum Order Quantity: 1
Manufacturer: Gunk
Estimated to Ship: 1 to 5 Days

Our goal is to become your #1 source for electronic production supplies. With thousands of available products from top brands, we have everything your business needs to function at its best.

  • Free shipping over $250
  • Fast shipping with tracking on your account
  • 30 Day Satisfaction Guarantee
  • Phone or Email Customer Service


CLEANER Brake Parts 14oz Gunk Non-Chlorinated
Quickly removes brake fluid, dust build up and oil from brake parts and C.V. joint assemblies. Can be used without disassembling the brake unit. Dries completely and leaves no residue. Brake pads or linings that have been damaged (impregnated) with oil or grease should be replaced, not cleaned. To help retard the release of asbestos dust and other airborne particulate matter, follow the DIRECTIONS for use carefully.


  • Cleans fast
  • Dries completely
  • No residue
  • Removes brake dust
  • No chlorinated solvents

DIRECTIONS: 1) Turn off engine. 2) Protect rubber or plastic brake parts, seals and painted surfaces from spray. 3) Spray short bursts from a distance of 18-24 inches to wet parts. 4) Continue spraying at a distance of 12-18 inches to flush contaminants from surface. 5) Spray brake parts thoroughly and allow to air dry or wipe with a soft clean cloth. If deposits are heavy repeat application. DO NOT SPRAY ON HOT METAL SURFACES LIKE EXHAUST PIPES. IMPORTANT: THIS PRODUCT WILL ATTACK PAINTED SURFACES AND PLASTIC – FLUSH WITH WATER IMMEDIATELY.

STORAGE, HANDLING & DISPOSAL: FIRE AND EXPLOSION HAZARD: EXTREMELY FLAMMABLE. Use only in a well-ventilated area away from heat, sparks and flame. Pilot lights of furnaces, hot water tanks, OR EVEN STATIC ELECTRICITY can ignite vapors explosively. Do not use in confined spaces, enclosed garages, basements, or low lying areas where vapors can collect. Do not place can on hot surfaces or in direct sunlight which could cause can to burst violently. Keep can away from contact with electrical current or connections such as battery terminals because burn through may occur. EXPLOSION OR FLASH FIRE FROM LIQUID OR VAPORS MAY CAUSE SERIOUS INJURY OR DEATH. Store in a dry, well-ventilated area below 120°F (48°C). Do not puncture, crush, or incinerate (burn) can. Do not expose to heat, spark, or open flame. BREATHING & CONTACT HAZARDS: Do not breathe asbestos, dust particles, or vapors. Use NIOSH-approved respirator. Use only in a well-ventilated area with a constant flow of fresh air, and open doors and windows to prevent vapor buildup. INHALING CONCENTRATED VAPORS, INTENTIONALLY OR OTHERWISE, CAN CAUSE BRAIN AND PERMANENT ORGAN DAMAGE OR CAN BE FATAL. Avoid contact with eyes, skin, or clothing. Repeated contact may dry and defat the skin. Wear chemical-resistant goggles and solvent-proof gloves and apron. Remove contaminated clothing and wash before reuse. Remove contact lenses before use. Wash thoroughly after handling. May be harmful if swallowed. Dispose of product residue, rinsate, and empty container in accordance with all local, state, and federal laws and regulations. Empty aerosol cans are recyclable: consult your local recycling authority. Emptied containers contain product residue, so follow all warnings, even after container is emptied.

FIRST AID: EYE CONTACT: Flush thoroughly with water for 15 minutes while occasionally lifting eyelids and get prompt medical attention. SKIN CONTACT: Wash thoroughly with soap and water. If irritation develops, get prompt medical attention. INHALATION: Move to fresh air. If breathing becomes difficult, get prompt medical attention. INGESTION: DO NOT INDUCE VOMITING. Call Poison Control Center, Physician, or Hospital Emergency Room immediately.